You need to boot and run from the SD card image. The image does not re-flash the on-board eMMC, it is a live filesystem.
On 7/10/2013 1:03 AM, Klemen Dovrtel wrote: > Thank for the info. I made the SD image as described. Then i tried to flash > the board. I switched the power off, plugged in the sd card and switched the > power on while holding the boot button. All four user leds lit for a second > or so and than the led 3 and 5 lit solid. I thought now i have to wait for 45 > minutes, but nothing happened. Later i tried the board but it still runs with > the default software. Any idea what could be wrong? > > A also tried to start the board with the sd card inserted and i noticed that > the sd card was rewritten with some default beagle board documentation. > > Regards > Klemen > > > > > ________________________________ > From: Charles Steinkuehler <[email protected]> > To: Klemen Dovrtel <[email protected]>; Enhanced Machine Controller > (EMC) <[email protected]> > Sent: Tuesday, July 9, 2013 12:40 PM > Subject: Re: [Emc-users] Beaglebone LinuxCNC starterkit -> Beaglebone Black > > > On 7/9/2013 3:40 AM, Klemen Dovrtel wrote: >> Hello everybody, >> >> I noticed the BeagleBone version of LinuxCNC and decided to try it, but it >> seems i was not paying enough attention - I bought the Beaglebone Black >> instead of Beaglebone. >> >> Is there a simple way to make the Beaglebone LinuxCNC starterkit work on >> BeagleBone Black? Can i use the BeagleBone ready to run sd to flash the >> BeagleBone Black? > > That image is dated. You should start with the SD image from here: > > http://bb-lcnc.blogspot.com/p/machinekit_16.html > > ...it works fine with the "White" or the Black. > -- Charles Steinkuehler [email protected] ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
