The machinekit image does not flash the LEDs to show activity. Numbers 3 and 5 are on constantly for that image. That's a mistake I made...
On Wed, Jul 10, 2013 at 1:03 AM, Klemen Dovrtel <[email protected]>wrote: > Thank for the info. I made the SD image as described. Then i tried to > flash the board. I switched the power off, plugged in the sd card and > switched the power on while holding the boot button. All four user leds lit > for a second or so and than the led 3 and 5 lit solid. I thought now i have > to wait for 45 minutes, but nothing happened. Later i tried the board but > it still runs with the default software. Any idea what could be wrong? > > A also tried to start the board with the sd card inserted and i noticed > that the sd card was rewritten with some default beagle board documentation. > > Regards > Klemen > > > > > ________________________________ > From: Charles Steinkuehler <[email protected]> > To: Klemen Dovrtel <[email protected]>; Enhanced Machine > Controller (EMC) <[email protected]> > Sent: Tuesday, July 9, 2013 12:40 PM > Subject: Re: [Emc-users] Beaglebone LinuxCNC starterkit -> Beaglebone Black > > > On 7/9/2013 3:40 AM, Klemen Dovrtel wrote: > > Hello everybody, > > > > I noticed the BeagleBone version of LinuxCNC and decided to try it, but > it seems i was not paying enough attention - I bought the Beaglebone Black > instead of Beaglebone. > > > > Is there a simple way to make the Beaglebone LinuxCNC starterkit work on > BeagleBone Black? Can i use the BeagleBone ready to run sd to flash the > BeagleBone Black? > > That image is dated. You should start with the SD image from here: > > http://bb-lcnc.blogspot.com/p/machinekit_16.html > > ...it works fine with the "White" or the Black. > > -- > Charles Steinkuehler > [email protected] > > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
