No problem.. When we got these - It took a couple of days to figure out what the old pc software did (between actual circuit tracing and the internet)
I don't know how many of the compact 5pc lathes are still out there - unmolested... but this really does allow them to try linuxcnc without any changes to the lathe at all. (I think that is quite cool!) this is what linuxcnc outputs (this is just showing full wave) the latch is what makes the 74ls374 work in the emco interface. http://www.electronicsam.com/images/emco/Waveform.svg sam On 07/19/2013 09:48 AM, John Alexander Stewart wrote: > Sam - well done. > > Thanks for posting here, and on the homeshopmachinist.net bbs (and wherever > else you are posting) > > I've got an Emco Compact-8 to CNC-ize this winter - have everything except > for the ball screws, so seeing your Compact-5, with the old > electronics/steppers working away is really nice to see. > > I also have a contact with a Compact-5 CNC lathe kicking around; have to > see if they are willing to part with it, so that I have yet another project! > > JohnS. > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
