Ok, I added those line here: https://www.dropbox.com/s/09hpcp1mdt6545o/sources.jpg
but in update manager have nothing to update, also tried with $ sudo apt-get update $ sudo apt-get upgrade what did I missed? > > Thanks for testing joints_axes3! That's very helpful. > > joints_axes3 is currently an experimental feature branch, so testing it > is a little awkward, but possible. > > > Add these lines to the file in /etc/apt that you got the above lines from: > > deb http://buildbot.linuxcnc.org/ lucid scratch-rt > deb-src http://buildbot.linuxcnc.org/ lucid scratch-rt > > Use your regular update manager to update your package list, then select > the version of linuxcnc that has 'joints_axes3' in the version number. > > > The joints_axes branch needs some config changes, I've tried to write > down what you need to change here: > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?JointAxesBranch > > > Good luck, and let us know how it goes! > > > -- > Sebastian Kuzminsky ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
