Greetings all; My google foo seems to be on strike, I can't even find the pulley I put on the jackshaft I made to put a 1.5hp motor on this 7x12 last year.
That pulley has a 9mm bore, broached for a 3mm square key,one removable flange, 9.1mm between the flanges, with a 30mm OD flange, and 20mm long hub. This one made of ABS and was pretty well burned up last night. I count whats left of the teeth at 20 of them, but there is physical room for 24 in the area. That is the pulley on the jackshaft, located at the bottom of the old drive belt where the original motor drove it. The upper pulley is flangeless and hubless, bored for a 10mm shaft and keyed for a 4mm square key. I count 34 teeth on that one. I want to replace both pulleys with either alu or sintered steel versions, along with a fresh much higher quality belt, 3/8 or 9mm wide. I hit the top dozen or so pages google gave me, and no one has the lower pulley in a 9mm bore regardless of the material. Has anyone a better place, or a favorite place to buy such oddball stuffs? Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> NOTICE: Will pay 100 USD for an HP-4815A defective but complete probe assembly. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
