Try these guys out ... if they don't have it, I have other links I can dig up.
Dave https://sdp-si.com/eStore/CoverPg/Drive_Components.htm On 2/17/2014 9:12 PM, Gene Heskett wrote: > Greetings all; > > My google foo seems to be on strike, I can't even find the pulley I put on > the jackshaft I made to put a 1.5hp motor on this 7x12 last year. > > That pulley has a 9mm bore, broached for a 3mm square key,one removable > flange, 9.1mm between the flanges, with a 30mm OD flange, and 20mm long > hub. This one made of ABS and was pretty well burned up last night. > I count whats left of the teeth at 20 of them, but there is physical room > for 24 in the area. > > That is the pulley on the jackshaft, located at the bottom of the old drive > belt where the original motor drove it. > > The upper pulley is flangeless and hubless, bored for a 10mm shaft and > keyed for a 4mm square key. I count 34 teeth on that one. > > I want to replace both pulleys with either alu or sintered steel versions, > along with a fresh much higher quality belt, 3/8 or 9mm wide. > > I hit the top dozen or so pages google gave me, and no one has the lower > pulley in a 9mm bore regardless of the material. > > Has anyone a better place, or a favorite place to buy such oddball stuffs? > > Cheers, Gene ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
