I suspect that someone will have to drill/ream some standard bore pulleys for you to get 9mm.
I think that they will do that for you. Click on the quote request and ask them to supply them with 9mm bores. Dave On 2/17/2014 9:58 PM, Gene Heskett wrote: > On Monday 17 February 2014 21:54:36 Dave Cole did opine: > >> Try these guys out ... if they don't have it, I have other links I can >> dig up. >> >> Dave >> >> https://sdp-si.com/eStore/CoverPg/Drive_Components.htm >> > That is the same link someone gave me this afternoon on IRC. None with 9mm > hubs can be found there. > > Thanks Dave. > > I guess I'll yell at Chris Wood tomorrow (LittleMachineShop.com), he has at > times been helpful. > >> On 2/17/2014 9:12 PM, Gene Heskett wrote: >>> Greetings all; >>> >>> My google foo seems to be on strike, I can't even find the pulley I >>> put on the jackshaft I made to put a 1.5hp motor on this 7x12 last >>> year. >>> >>> That pulley has a 9mm bore, broached for a 3mm square key,one >>> removable flange, 9.1mm between the flanges, with a 30mm OD flange, >>> and 20mm long hub. This one made of ABS and was pretty well burned >>> up last night. I count whats left of the teeth at 20 of them, but >>> there is physical room for 24 in the area. >>> >>> That is the pulley on the jackshaft, located at the bottom of the old >>> drive belt where the original motor drove it. >>> >>> The upper pulley is flangeless and hubless, bored for a 10mm shaft and >>> keyed for a 4mm square key. I count 34 teeth on that one. >>> >>> I want to replace both pulleys with either alu or sintered steel >>> versions, along with a fresh much higher quality belt, 3/8 or 9mm >>> wide. >>> >>> I hit the top dozen or so pages google gave me, and no one has the >>> lower pulley in a 9mm bore regardless of the material. >>> >>> Has anyone a better place, or a favorite place to buy such oddball >>> stuffs? >>> >>> Cheers, Gene >> ------------------------------------------------------------------------ >> ------ Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.cl >> ktrk _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
