Ok, thanks! How about firmware for 5i24? Can I take the same vhd file you compiled for me for 5i23, change there the board number and would it work? Are you aware of the differences between 5i23 and 5i24? I see that they both have 3x 50 pin connectors and that is about all that I understand. I recall that 5i25 was totally different of how the board was flashed with firmware, so do you know, where can I find out about 5i24?
Viesturs 2014-04-09 14:43 GMT+03:00 andy pugh <bodge...@gmail.com>: > On 4 April 2014 20:42, Viesturs Lācis <viesturs.la...@gmail.com> wrote: > > > I saw in Mesa homepage that there is 5i24 board. > > According to its manual it seems like a possible drop-in replacement of > > 5i23 card, if correct firmware is provided. > > Is it supported by LinuxCNC (hostmot2 driver)? > > > http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=commit;h=85d30465f10b5e5751f79d8757dc8198c4db12c9 > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
