2014-05-14 9:26 GMT-04:00 Peter C. Wallace <p...@mesanet.com>: > On Wed, 14 May 2014, Viesturs L?cis wrote: > > > Date: Wed, 14 May 2014 06:54:46 -0400 > > From: "[UTF-8] Viesturs L?cis" <viesturs.la...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: Re: [Emc-users] 5i24? > > > > I finally received 5i24 board, but I am stucj at getting LinuxCNC to > > cooperate with it. > > I have 2.7.0-pre0.43... and I am getting an error: > > There is a patch that needs to be applied to hm2_pci.c >
Thanks to Michal, after 3rd recompilation I finally got it to work, LinuxCNC now recognizes 5i24 card. I used mesaflash utility from 5i24.zip file and flashed the card with 5i24_16_svsttp_6_6_7i39.bit firmware file. The problem is with pwmgens - it seems to me that there are 1-phase pwmgens in this firmware file - not only LinuxCNC complains about my config and 3pwmgen related pin names, but also in HalShow the name is "pwmgen" and there are only 2 pins per pwmgen - value and enable. It should be 3 values - one per each phase. ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
