I finally received 5i24 board, but I am stucj at getting LinuxCNC to cooperate with it. I have 2.7.0-pre0.43... and I am getting an error:
Debug file information: ... insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hm2_pci.ko': -1 No such device hm2-servo.hal:58: exit value: 1 hm2-servo.hal:58: insmod failed, returned -1 See the output of 'dmesg' for more information. ... Kernel message information: ... [ 319.121928] hm2: loading Mesa HostMot2 driver version 0.15 [ 319.128450] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 319.128516] hm2_pci 0000:01:07.0: PCI INT A -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 [ 319.128523] hm2_pci: discovered 5i24 at 0000:01:07.0 [ 319.128533] hm2_5i24.0: unknown PCI Device ID 0x5124 [ 319.128540] hm2_pci 0000:01:07.0: PCI INT A disabled [ 319.643069] hm2: unloading [ 319.798730] RTAI[math]: unloaded. [ 319.895691] SCHED releases registered named ALIEN RTGLBH [ 319.910192] RTAI[malloc]: unloaded. [ 320.008018] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 320.013750] I-pipe: Domain RTAI unregistered. [ 320.013762] RTAI[hal]: unmounted. I would appreciate any suggestions... Viesturs 2014-04-11 9:05 GMT-04:00 Peter C. Wallace <p...@mesanet.com>: > On Fri, 11 Apr 2014, Viesturs L?cis wrote: > > > Date: Fri, 11 Apr 2014 10:26:02 +0300 > > From: "[UTF-8] Viesturs L?cis" <viesturs.la...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: Re: [Emc-users] 5i24? > > > > 2014-04-11 6:22 GMT+03:00 Peter C. Wallace <p...@mesanet.com>: > > > >>> 1) do I understand correctly that firmware for 2x 7i39s and few > stepgens > >> is > >>> not that demaning and also smaller fpga of 5i24 will handle it with > ease? > >> > >> It will fit easily (the 5I24-16's FPGA is about 2x the size of the 5I23 > >> FPGA) > > > > > > And 5i24-25 is even bigger... Nice! > > > > > >> > 2) could you help me out with the firmware file? or at least share vhd > >> file > >>> of 5i24 firmware for 7i39 card, so that I could try to add stepgens to > >> it? > >>> > >> > >> The pinout file will be the same for any 72 pin I/O fpga card, so your > 5i23 > >> bitfile name might be a clue. > >> > >> PIN_SVSTTP6_5_7I39_72.vhd > >> PIN_SVSTTP6_6_7I39_72.vhd > > > > > > The name of the bitfile you sent me 2 years ago is SVSTTP6_6.BIT, so the > > second vhd file it is. Where can I find it? I do not see it here: > > > http://git.linuxcnc.org/gitweb?p=hostmot2-firmware.git;a=tree;h=refs/heads/master;hb=refs/heads/master > > > > Viesturs > > > Its in the 5i24.zip file from mesa as are the bit files for 5I24-16 > and 5I24-25 cards > > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > ------------------------------------------------------------------------------ > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
