it work perfectly! it runs on all PC desktop computers. i am user of EMC2 my target commercial application and it works and it can be 10000 years old - if it works. you are from theory play with emc2 you can change emc2 twice a day. do not need to distract this conversation. the target is use 0 +5 v to control feed and only that what i am interesting.
On Sat, May 17, 2014 at 2:07 PM, Jon Elson <[email protected]> wrote: > On 05/17/2014 03:32 PM, a k wrote: > > About ---original configuration---- > > in 2008 i was on CNC work shop at cardinal engineering. > > i took disk that was available at work shop. > > > > those CD disk was mark --- emc2.24 8.04 2008---- > > > Why ON EARTH are you trying to use a SIX year-old version of > EMC2? > It probably won't run on most modern hardware. And, > LinuxCNC has > advanced light years in that interval! > > Jon > > > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform > available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
