You must look at the integrators manual and look at the HAL components that are available. You dont have to know C just how to read. You will find all you need in the manuals. Find the encoder component not the hostmot stuff. Use "man encoder".
You will need some electronics that turn your 5v into some form of digital value that can be translated to a value in the software. As you only have a parallel port you will have to turn the voltage into a frequency. Then you use the parport pin that is connected to the encoder component in the HAL file to connect your signal to the feed value. All of this has been told to you before and the only way you are going to get this done is to learn a bit about setting up of Linuxcnc. Now I have given you the solution, you must go and try it. If you have problems trying, we will all be willing to help you. One last thing,please update your software as support for the old stuff is no longer available as we have all moved on to the latest production release. See how to do this by looking at the wiki pages for updating linuxcnc. Good luck. :) On 2014-05-18 11:31, a k wrote: > not sure about -- yes i did assemble system on emc2 2008. > yes it working system. > i am not software engineer. i do not know how to configure software. i do > not know C or C++ . > to build emc2 working 3 axis system one does not need any software > ---configure----knowledge-experience. > is there manual about - step by stem how assemble system - make change in > software -- to get final result --- use 0 +5C to control change feed ? > > /////////////////////// > i look at this link - > http://www.linuxcnc.org/docs/devel/html/man/man9/hostmot2.9.html#encoder > > how to get page where need make change on my computer? > what change do i need do? > > > > > > On Sun, May 18, 2014 at 1:04 AM, andy pugh <bodge...@gmail.com> wrote: > >> On 17 May 2014 22:32, a k <pccncmach...@gmail.com> wrote: >>> those CD disk was mark --- emc2.24 8.04 2008---- >>> many people from the list know what on those disk better than i do. >>> i load those software - from that disk-- did tune up my ac servo motor , >>> wired my limit home switches and that is all. >> >> I find it strange that you seem to have been using LinuxCNC since 2008 >> and you still don't seem to know how to configure it. >> >> The questions you are asking are answered in the manuals. >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >> Instantly run your Selenium tests across 300+ browser/OS combos. >> Get unparalleled scalability from the best Selenium testing platform >> available >> Simple to use. Nothing to install. Get started now for free." >> http://p.sf.net/sfu/SauceLabs >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 QQ 1767394877 ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
