hi this will start classicladders ----add in hal
This line loads the real time module: loadrt classicladder_rt This line adds the Classic Ladder function to the servo thread: addf classicladder.0.refresh servo-thread is this same classicladders? https://sites.google.com/site/classicladder/home/downloads aram On Mon, Jul 28, 2014 at 7:28 AM, Dave Cole <[email protected]> wrote: > > Check out: > > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ClassicLadder_Ver_7.124 > > > I think this is still true: > > > >>6.6. %QF and %IF variables > > Classicladder now can connect to float pins. Classicladder does not yet > internally handle floats, so it cuts the floating point off leaving an > integer. Allows connections to float pins with out using a conversion > component. The default number is 10 each. > << > > Dave > > > On 7/28/2014 2:42 AM, Marius Liebenberg wrote: > > Aram > > You should be able to put in a formula in any input box. Something like > > "if V < value then ...." > > I suggest that you install a stand alone classic ladder editor to test > > your script with. It is easier this way to start off with. You can have > > a look at the help to assist you. > > The classic ladder software in linuxcnc has a standalone version as well > > that is offered by the original author. > > > > > > On 2014-07-28 07:34, a k wrote: > >> Hi > >> Dave > >> interesting does Classic Ladder has ability to read float number - like > >> value of electrical current -- that can fluctuate ( read output some > some > >> sensor etc) , do calculation and make output also float number - like > any > >> value between 0 +5 V DC ? > >> > >> > >> > >> thank you > >> aram > >> > >> > >> > >> > >> On Sun, Jul 27, 2014 at 8:16 PM, Dave Cole <[email protected]> > wrote: > >> > >>> Aram, > >>> > >>> I don't understand what you want to do but that welder has a very > >>> limited duty cycle. > >>> > >>> If you weld continuously it will overload and shutdown in less than 15 > >>> minutes. > >>> > >>> I use PLCs all of the time and know the RS 500 controllers and > >>> software. The AB controllers are much easier to use if you have to > >>> write more than about 25 rungs. Siemens S7-1200 controllers are even > >>> easier to use. If you need something less than about 25 rungs Classic > >>> Ladder works fine. Obviously Classic Ladder has a huge price > >>> advantage. :-) > >>> > >>> You can use the 7i37 digital I/O with Classic Ladder if you have any > I/O > >>> points left. > >>> > >>> Dave > >>> > >>> > >>> > >>> On 7/27/2014 4:28 PM, a k wrote: > >>>> hi > >>>> i am working on 2nd part of my project which is integration of > >>>> metal depositor what will be welter like this > >>>> http://www.harborfreight.com/90-amp-flux-wire-welder-68887-8494.html > >>>> > >>>> i will need some plc that can control cnc machine with 0 --5V DC > >>>> and control speed of welder. > >>>> > >>>> Current (A amperage) of welding process -main parameter. > >>>> can i use input power parameter -- 110 V AC 20 A - to estimate > current of > >>>> real time welding process? > >>>> > >>>> I know some rs 500 logic - > >>>> is using of EMC2 Classicladder to integrate welder and cnc mill good > >>> idea? > >>>> i want to keep existing cnc mill as a separate unit . > >>>> > >>>> if i will use EMC2 Classicladder only as a integrator of welder to > >>> existing > >>>> cnc mill what board/s do i need - hardware ? > >>>> > >>>> i have 2nd set mesa 5i20/7i33/7i37-- use them or there is something > >>> better? > >>>> thank you > >>>> aram > >>>> > >>> > ------------------------------------------------------------------------------ > >>>> Want fast and easy access to all the code in your enterprise? Index > and > >>>> search up to 200,000 lines of code with a free copy of Black Duck > >>>> Code Sight - the same software that powers the world's largest code > >>>> search on Ohloh, the Black Duck Open Hub! Try it now. > >>>> http://p.sf.net/sfu/bds > >>>> _______________________________________________ > >>>> Emc-users mailing list > >>>> [email protected] > >>>> https://lists.sourceforge.net/lists/listinfo/emc-users > >>> > ------------------------------------------------------------------------------ > >>> Infragistics Professional > >>> Build stunning WinForms apps today! > >>> Reboot your WinForms applications with our WinForms controls. > >>> Build a bridge from your legacy apps to the future. > >>> > >>> > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > >>> _______________________________________________ > >>> Emc-users mailing list > >>> [email protected] > >>> https://lists.sourceforge.net/lists/listinfo/emc-users > >>> > >> > ------------------------------------------------------------------------------ > >> Infragistics Professional > >> Build stunning WinForms apps today! > >> Reboot your WinForms applications with our WinForms controls. > >> Build a bridge from your legacy apps to the future. > >> > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
