This tool work I programmed with it and then reboot my pin showed as expected For some reason when I used the tools that come from mesa in there zip file it didn't report an error but I don't think it was programing it
-----Original Message----- From: Peter C. Wallace [mailto:[email protected]] Sent: Wednesday, September 17, 2014 10:21 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] 5i25 configuration On Wed, 17 Sep 2014, Kasey Matejcek wrote: > Date: Wed, 17 Sep 2014 09:56:47 -0500 > From: Kasey Matejcek <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "'Enhanced Machine Controller (EMC)'" > <[email protected]> > Subject: Re: [Emc-users] 5i25 configuration > > Yes did a complete shutdown and power up Including unplugging the > computer to make sure and still no change can you 1. Get the latest mesaflash (either from the package manager or build from source) latest source is here: https://github.com/micges/mesaflash/archive/master.zip (unzip, cd to mesasflash-master, make, sudo make install) 2. Run this command sudo mesaflash --device 5i25 --readhmid > my5i25.pin and take a look at the pinout file my5i25.pin to see what firmware is installed in the 5i25 > > -----Original Message----- > From: andy pugh [mailto:[email protected]] > Sent: Wednesday, September 17, 2014 7:05 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] 5i25 configuration > > On 17 September 2014 12:58, Kasey Matejcek <[email protected]> wrote: >> I have tried flashing the firmware on it with the mesa utility >> prob_rfx2 and no change > > You need to completely power-off the computer for the new firmware to > show up. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ---------------------------------------------------------------------- > ------ > -- > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce Perforce version control. > Predictably reliable. > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg. > clktrk _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ---------------------------------------------------------------------- > -------- > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce Perforce version control. > Predictably reliable. > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg. > clktrk _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ---------------------------------------------------------------------------- -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
