On 4/1/15 3:11 PM, alex chiosso wrote: > I do believe that you can use LCNC with a usb to RS485 converter and the > Modbus protocol by ClassicLadder softplc built into LCNC or the mb2hal > component.
I agree. We also have drivers for a couple of VFDs that use modbus: http://linuxcnc.org/docs/2.7/html/man/man1/gs2.1.html http://linuxcnc.org/docs/2.7/html/man/man9/wj200_vfd.9.html http://linuxcnc.org/docs/2.7/html/man/man1/vfs11_vfd.1.html http://linuxcnc.org/docs/2.7/html/man/man1/vfdb_vfd.1.html (Huh, it's funny that the wj200 manpage is in section 9, but all the others are in section 1. We are nothing if not inconsistent. And confusing.) -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
