On 4/20/2015 5:56 AM, andy pugh wrote: > On 20 April 2015 at 12:29, Gregg Eshelman <g_ala...@yahoo.com> wrote: >> How would I connect another computer to snoop and save the com traffic >> without interfering with the 2-way communication with the mill? > > Maybe I am misunderstanding the problem, but input pins connected to a > signal wire shouldn't affect the voltage on the wire. (assuming no > pull-ups or pull-downs on those input pins)
I've no idea what the circuitry is like inside the Animatics control box, neither does Moog Animatics. Apparently during the buyout/merger they destroyed all the documentation on old Animatics products. I'd want some isolated way of tapping into the serial cable to sniff the data. Anyone have an inline RS232C data logger I can borrow for a short time? :) Has to be able to work at 19200, the default speed of this mill. The only other speed it can run at is 9600, which has to be configured through a SET command before running PLM2000. --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
