>On 19 May 2015 at 10:45, Marius Liebenberg <mar...@mastercut.co.za> >wrote: >> I am not sure if this is a bug with tool change or with the paths. I >> cannot do a tool change as an error comes up saying that the named >> parameter #<ini[change_position]z> is not found. > >G-code access to INI file variables is controlled by an INI config >item. >http://www.linuxcnc.org/docs/2.7/html/remap/structure.html#_optional_interpreter_features_ini_file_configuration_a_id_sub_ini_features_a > >Do you have FEATURES=12 inside the [RS274NGC] section? > Andy I have tried features 30 and 32 as I also have the linuxcnc_features in the mix.
>-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
