>On 19 May 2015 at 11:23, Marius Liebenberg <mar...@mastercut.co.za> >wrote: > >>> Is that the same thing? I haven't installed "features" (though it >>> looks really good, and I keep meaning to) but I don't think it would >>> use the same FEATURES mask. >> >> Yes it is the same features from Nick but I have yet to get it to >>work. > >I think that the word is the same but the thing is different. > Agreed, Nick calls his stuff linuxcnc_features and the features variable is for remapping. I have use those (features) a bit in some components and gcode and it work great.
>> I think there is a common problem somewhere with the paths thing. If >>I load >> Ngcgui I cannot run your Lathe Macros or any other Gmoccapy macro. It >>simply >> just does not find any MDI file or sub routine file or anything no >>matter >> where I put the required files. > >SUBROUTINE_PATH can take up to 10 colon-separated entries. >http://www.linuxcnc.org/docs/2.7/html/config/ini_config.html#sub:RS274NGC-section > >I don't know how ngcgui looks for files or whether it over-writes the >path. It might be but I dont know either. It is rather irritating as one needs to use all of the various supplied programs in order to get a complete working suite. The problem is who doe you ask to look at it? Is it Gmoccapy or is it Ngcgui :( > >-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
