Do you have FEATURES=12 inside the [RS274NGC] section? >>> >> Andy I have tried features 30 and 32 as I also have the >>linuxcnc_features in >> the mix. > >Is that the same thing? I haven't installed "features" (though it >looks really good, and I keep meaning to) but I don't think it would >use the same FEATURES mask. Yes it is the same features from Nick but I have yet to get it to work. It seems to work on the simulator but have not worked on the lathe or the mill so far. I think there is a common problem somewhere with the paths thing. If I load Ngcgui I cannot run your Lathe Macros or any other Gmoccapy macro. It simply just does not find any MDI file or sub routine file or anything no matter where I put the required files. Ngcgui works though. If I take the ngcgui stuff out of the path variables in the ini file then things work again and that is why I am hinting at the possibility of paths problems in the code somewhere.
>32 won't work at all. >30 will enable INI and HAL pin access, plus preserve-case and n_args, >so should work. I changed it to 31 and then the ini variable is found. I think 31 turns everything on. > >So, the next question is if you have tried [RS274NGC]FEATURES=30 _and_ >[CHANGE_POSITION]Z in the INI file at the same time? > >-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
