http://linuxcnc.org/docs/2.6/html/gcode/machining_center.html#sub:feed-rate
On Wed, 24 Jun 2015 15:21:03 -0500 TJoseph Powderly <[email protected]> wrote: > Could you please check what this does? > G91 A360 X0 F100 > this has an X component ( no distance tho ) > thanks > TomP > > On 06/24/2015 01:24 PM, Len Shelton wrote: > > On a machine with a rotary A axis, if I run > > > > G91 A360 X10 F100 > > > > the machine moves 100IPM on the X and the A axis completes a 360 > > degree rotation at the same time. If I then run > > > > G91 A360 F100 > > > > the machines takes almost 2.5 minutes to complete the rotation, because > > it is only running 100 degrees per minute. > > > > So it seems that the feedrate of the linear axis overrides the feedrate > > of the angular units if a linear move is coordinated with it. Can > > someone confirm this? > > > > Also, this becomes a problem for a CAM program like Aspire when it has > > an angular move without a simultaneous linear move. I was wondering if > > anyone had run across this or if anyone had any thoughts. > > > > >Len > > > > > > > > ------------------------------------------------------------------------------ > > Monitor 25 network devices or servers for free with OpManager! > > OpManager is web-based network management software that monitors > > network devices and physical & virtual servers, alerts via email & sms > > for fault. Monitor 25 devices for free with no restriction. Download now > > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------------------------ > Monitor 25 network devices or servers for free with OpManager! > OpManager is web-based network management software that monitors > network devices and physical & virtual servers, alerts via email & sms > for fault. Monitor 25 devices for free with no restriction. Download now > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
