On Wednesday 24 June 2015 16:02:11 Len Shelton wrote: > Its definitely set to angular.
And the max velocity? Set it up 20x what it is currently, then use the jog slider to see how fast it can move w/o a stall. Scale that to be the max accel & scale the max vel at about 65% of that, should give you pretty much what it CAN do with that motor & driver voltage. This won't effect what you are seeing when commanding a simultaineous move. I have always been under the impression that the first vel limit it hits is the controlling cap on the other axis's speed, but perhaps some recent bit rot has changed that? IDK, so experimentaton would seem to justified. I can make 5+ revs a minute with 90 psi air in the table. Teeny 4", very poorly made $100 table from India. I cut a groove around the face of the base casting about 1/8" wide & 3/32" deep, drilled down about 3/8" to intersect a 1/8" pipe pressed into the side, sealed with red thread-locker. Someday I really do need to buy a decent 6 incher. Someday before I fall over... > > >Len > > > >>>> For your check, make sure the 4th axis is set to angular as the > > first thing to check in the .ini file. > > > ---------------------------------------------------------------------- >-------- Monitor 25 network devices or servers for free with OpManager! > OpManager is web-based network management software that monitors > network devices and physical & virtual servers, alerts via email & sms > for fault. Monitor 25 devices for free with no restriction. Download > now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
