Greetings; I have a motor that at one time drove a small paper shredder, but the knives wore out wal too soon so I salaged the motor & gear train & binned the rest.
Its a series wound motor, and I have it broken out to 4 wires now, so its reversible with a dpdt relay driving either the field reversal or the armature. On 12 volts it marches along at the output of the first reduction gear with more than enough power to flip the jigs gage contacts out of the way one the G38.2 things have done their thing. I am in the process of mounting some limit switches with diodes across them so it will run away from that limit, stoppingf it when it has moved about 120-140 degrees. I found a source of short F-F gender changers, so I am about to try & make use of this BOB's relay on the new mill, in this case I need that relay closure this BOB has. Does anyone have one or these, and if you do, what parport pin drives that relay? I did some googling tonight, thinking I could find another .pdf on this card and came up empty. I also thought I had a copy of it on this machine, but the usual suspects didn't confess. URL's to the docs would be fine. Thanks all; Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
