On Wednesday 30 September 2015 12:47:41 Peter Rosenblom wrote: > Hi Gene, > > I got a link with the purchace of a bob just like that: > http://www.icstation.com/ebay/IC/All%20data%20modules/1849.zip (I > havent gotten viruses, but click at your owm risk)
Didn't seem to be any worse than other M$ created pdf's. They always give mc a tummy ache, but it called up kpdf when I hit the pdf, and printed it just fine. Thanks a bunch Peter. > > A simple schemiatic of the board breakouts in a pdf and some shady > mach3 stuff. Hope it helps. It doesn't appear that english is the authors native language, but several re-reads do seem to help in the translation to English as spoken in these here parts. :) Now I am looking for a box to put this in, but it looks as if I cut up some elderly raw PCB material I was given about 16 sq foot of a few weeks back, and make a box out of that. Anything cast (or extruded) alu and big enough is north of $30 on fleabay. Then I need to cobble up a 24 volt supply just big enough to run a 24 volt ice cube, and enough extra that I can use a cheap bucking switcher to make up to 1.5 amps for the motor. I may have to go raid my local electronics junk yard for that. I have some donation material already in the truck. Too bad these buckers are only rated for a 40 volt input or I'd steal an amp or so from the bottom half of the twin stacked 55 volts each spindle motor supply. But I do have one smaller toroid power transformer I haven't measured recently enough to recall what it can do. But it will be later tomorrow before I can do that as one of the first things I need to do is take the Toy out and get a fresh battery put in it. Toy is 2007 model, battery is OEM & probably out of water. 8 years out of a L-A battery in auto service isn't too bad... I have done better than that, but I designed and built the voltage regulator. ;-) Stuff like this keeps me out of the bars don'tcha know. Thanks Peter Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
