John, My second video shows how to center the stylus. https://www.youtube.com/watch?v=na6PzAlWdIw
The one you are looking at looks like a good probe. If you get it let us know how it works. It has one feature that I would like, a ruby stylus. Jim On 12/13/2015 6:08 AM, John Thornton wrote: > Does it have a way to center the stylus? > > I'm going to try this one > > http://deepgroove1.com/stainlessprobe/stainlessprobe.htm > > JT > > On 12/12/2015 6:28 PM, Jim Craig wrote: >> I use the one from CNC 4 PC. It works pretty good and is relatively >> inexpensive. >> >> I made some videos about using it. They are on the YouTube. >> >> On 12/12/2015 3:20 PM, John Thornton wrote: >>> I could use a probe on my BP Series 1 with Anilam CNC conversion but >>> don't have time to make one. Any suggestions for a US probe? >>> >>> JT >>> >>> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users