On 27 December 2015 at 06:55, Bruce Layne <[email protected]> wrote: > or you can > epoxy coat the inside of the outer piece of heat shrink over soldered > connections, and when you shrink it the epoxy oozes out the ends and > makes a waterproof seal.
Or you can buy heat-shrink with hot-melt glue pre-installed. A lot more convenient and not that much more expensive. http://uk.rs-online.com/web/p/heat-shrink-cold-shrink-sleeves/4811797/ -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
