On 02/26/2016 08:00 AM, Forum Deswysen wrote: > https://drive.google.com/open?id=0B5hmBjm5ot8NSDhCTmpsWkk3aVU > > This 3rd picture seems to show you indicating you can rock the screw forward/backward by 10 degrees. This would seem to indicate wear and looseness in the ballnut, or possibly in the mounting of the nut. it appears the block the nut sits in is NOT the actual ballnut, but a mount for it. So, you might see if the ballnut is no longer firmly mounted inside that mount. Some nuts are threaded on the outside, and screw into a threaded hole in the mounting block. Then, there needs to be something that locks the nut into the mount.
Others are bolted to the mount. These bolts could have loosened, possibly by stretching. if loose, you might replace the bolts. Jon ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
