On 29 March 2016 at 07:34, Danny Miller <dan...@austin.rr.com> wrote:
> 1.  xhc has no effect in World mode at all.  Either the XYZ page or when
> you select MDI

Which version of LinuxCNC are you using?

In 2.7 incremental jogging (which I think includes wheel jogging) is
not supported, as described in the Gantrykins documentation:
http://linuxcnc.org/docs/2.7/html/man/man9/gantrykins.9.html

Unless your machine is set up with separate home switches for each
side to support auto-squaring then it might be simpler to configure as
a simple slaved config and trivkins (ie, just send the X step pulses
to two drives)

If you do wish to use Gantrykins then you should consider using the
joints_axes12 development branch of LinuxCNC (which needs more
testing, but has been reliable on my trivkins machines for years). I
believe that that does support world-mode incremental jogging.

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785471&iu=/4140
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to