Thanks Jeff, I have installed the sim in a virtual box for now on a fresh install of debian 8.
Linden On 2016-07-27 04:57 AM, Jeff Epler wrote: > That wiki page is not accurate in several respects, and is out of date > in others. I have added a cautionary note and a pointer to the official > (and hopefully more accurate) instructions that are part of the > documentation package: > http://linuxcnc.org/docs/master/html/code/building-linuxcnc.html > > LinuxMint 19, which is reportedly based on Ubuntu 16.04, is a bit too > new for linuxcnc to work properly in all respects. Unless your interest > is developing linuxcnc to better work with this OS, you should instead > start by choosing an OS that LinuxCNC supports properly. > > (For instance, on Ubuntu 16.04 due to an incompatible change in either > Tcl or Python that we haven't fully diagnosed yet, let alone fixed, the > AXIS UI has trouble selecting the Y axis for homing. This is just about > certain to carry over into LinuxMint 19 and also affect Debian Stretch) > > Anyway, it looks llke the problem you show below is that you have > installed several different versions of Tcl -- the log you posted > mentions both 8.4 and 8.5, while current Linux distributions use 8.6 as > the default version. Remove all other versions and install only the 8.6 > version tcl and tk. > > Jeff > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity planning > reports.http://sdm.link/zohodev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
