On 08/17/2016 01:01 PM, Florian Rist wrote: > Hi Jon > >> And, the info available from Blum is only >> sales info, with no user manual or anything that >> I can find. > I had a quick look and fond a lot of info on the TC60. Its identical to > the TC50 except it uses radio instead of IR. The features, LEDs, etc. > should be the same, I guess. > > Here is an overview on documents on the TC60 submitted to the FCC: > > https://fccid.io/ZCQTCA > > TC60 Manual: > https://fccid.io/document.php?id=1497495 > > Thanks, not sure it corresponds. I can trigger it between off, on normally (green flashing) and low batt? (green/blue flashing) from the IR interface. So, it seems the green/blue may mean something different on the TC50. But, that's the first manual I've seen that mentions the LEDs. (Possibly this is a test mode to allow you to simulate a low battery in the probe to check the interface to the CNC control. Actually, that makes sense!)
I will have to build a circuit to send binary patterns to it to find out what is the turn-on and turn-off codes. I've already deciphered the IR output scheme, really simple, should be able to put that in a CPLD and generate a contact closure for the probe. Thanks, Jon ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
