Yes, the diagram has been dropped by the mailing list software. You can find it here: https://forum.linuxcnc.org/media/kunena/attachments/16648/Mauriceservo.jpg
Frederic. On 17/09/2016 15:32, Gene Heskett wrote: > On Saturday 17 September 2016 05:20:09 Frederic RIBLE wrote: > >> Hello, >> >> We are working on a retrofit for a Mori Seiki SL-0 CNC lathe. >> The original X/Z axis servo drives are Fanuc analog. >> They work in velocity mode with external frequency to voltage >> conversion embedded in the original CNC controller. >> We would like to replace the controller with a Mesa 7i48/6i24 >> combination. We plan to use one pulse encoder input to make the >> frequency to voltage conversion and generate the velocity feedback for >> the drive. >> See attached diagram. > No attached diagram came thru, Frederic, perhaps too big? > >> Anyone having success with similar setup? Does it make sense? >> Do we have to anticipate specific stability problem in the closed >> loop? >> >> Thanks. >> Frederic (http://blog.f1oat.org/) >> >> ---------------------------------------------------------------------- >> -------- _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene Heskett ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users