That depends on you, if you do nothing you get G64
http://linuxcnc.org/docs/2.7/html/gcode/g-code.html#gcode:g64

If you set G64 P <Q> you get something else
http://linuxcnc.org/docs/2.7/html/gcode/g-code.html#gcode:g64

If you set G61 or G61.1 you get something different
http://linuxcnc.org/docs/2.7/html/gcode/g-code.html#gcode:g61-g61.1

JT

On 10/18/2016 7:48 AM, Erik Friesen wrote:
> I have been watching my vintage 1996 haas, and have begun to notice
> all the non cutting times, pauses, etc.  It really seems that non
> rapid, between rapid, and other slow motions are overlooked time
> costs.  Note the non machining pauses on this DM-1
> http://www.haascnc.com/video.asp?mode=demos&VidID=c5-XXw0gLxg
>
> I see this on my machine too, rapids don't blend, so G0Z1 followed by
> G0Z5 will always have a noticeable pause.
>
> How does lcnc handle rapids in this scenario?
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to