> > There are requirements on inspection for high pressure vessels. > > > > Maybe your device is better used at competing business burning them to > > death instead of you? > > > > Well since this is mostly a project to start a business and since I want to > keep the costs down I would really like to make all the processes on my own > (If it's really possible off course). I'm trying to figure out the best way > of doing this. > > I came to the conclusion that the hardest part is the heating of the mold > in such a short time. Cooling is not going to be a problem at least in the > safety section.
If you want constant temperature you better look for a material with a suitable melt point then heat storage capacity at this temperature would be very good. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users