On 3 April 2017 at 22:06, hubert <h...@hbahr.org> wrote: > Thank you for the the 3D-model of a split D1-5 model spindle nose. > What was your source of the D1-5 dimensions?
I have a copy of the ISO standard. > Since I am doing this for an FHA-40C my PCD is 112MM right under the > CAMS. In this case > I think I will be using a thicker bottom plate and counter sinking some > Flat Head M10 bolts. > How much material would you recommend between the head of the bolt and > the Mounting plate, I am a computer engineer not a mechanical engineer. I would say that there isn't much to be gained by having a lot more than the thickness of the bolt head. It might be interesting to model it and do the FEA to find out whether my guess there is correct. I am not technically an engineer either, despite having "Senior Engineer" as a job title :-) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
