Honestly we hardly ever have to clean our tools, but we don't mill much pitchy wood, mostly hardwoods and MDF. For us if a tool is getting clogged up, it is because it is too dull and is getting too hot, or the feed rate is way to slow and it got too hot. Either way it usually ends up in the bin.
----- Original Message ----- From: "craig" <cr...@facework.com> To: emc-users@lists.sourceforge.net Sent: Thursday, April 13, 2017 12:33:11 PM Subject: [Emc-users] Cleaning Carbide Bits -plywood gue. What is the best way to clean plywood glues off small carbide router bits? I use small carbide bits to work wood and sometimes plywood. Mostly smaller than 3mm(1/8 in) bits. Sometimes plywood glue melts onto the bits. Cleaning them is a problem. Suggestions? Craig ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
