On 16 May 2017, at 14:27, Gene Heskett wrote: > Greetings all; > > And the next logical question from me is: > > Has anyone put a printhead on a std moving table milling machine, and > used it to do some 3d additive printing? I am "out of room" for more > machines, and that seems like a possible to do project. Doing it well > would remain to be seen. >
Well I would certainly like to try this. > The printhead seems like the lessor of two aspects, as a heated bed that > big seems to be the bigger problem. > The bed wouldn't need to be as big as the bed of the mill (at least initially). Marcus > Discussion? > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
