You can print without a heated bed and you can just slice a stl file and remove all the M codes and run it on your mill and watch the velocity, if it is constant I'd say you can print.
JT On 5/16/2017 8:27 AM, Gene Heskett wrote: > Greetings all; > > And the next logical question from me is: > > Has anyone put a printhead on a std moving table milling machine, and > used it to do some 3d additive printing? I am "out of room" for more > machines, and that seems like a possible to do project. Doing it well > would remain to be seen. > > The printhead seems like the lessor of two aspects, as a heated bed that > big seems to be the bigger problem. > > Discussion? > > Cheers, Gene Heskett ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
