I try it .... but not send any generated gcode to my mill... so not well tested.
it seems to work. regards giorgio ________________________________ Da: andy pugh <bodge...@gmail.com> Inviato: giovedì 18 maggio 2017 23.54 A: Enhanced Machine Controller (EMC) Oggetto: Re: [Emc-users] Best cam linux/open for additive manufactory On 19 May 2017 at 00:22, Chris Albertson <albertson.ch...@gmail.com> wrote: > Last time I tried to use all open > source tools I was stuck at the point where I have a 3D design but could > not turn that file into g-code. You definitely can do that last step with PyCAM, but you would need to be rather patient for 3D milling. PyCAM does actually feel moderately polished, it is just that the 3D algorithms were impractically slow last time I tried it. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users> lists.sourceforge.net This list is for users of the Enhanced Machine Controller (EMC). Topics include how to obtain, install, configure, and use EMC, as well as other general EMC related ... ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
