> ... > but if you want some geda symbols or testing, I will help As is now pins have some not necessary attributes but to start with I must figure out which attributes are necessary. I figured out attributes "loadrt" and "thread" might be useful. If attributes exist and are empty default behavior could be used but to override with "none" or any other value might be useful, "?" where number of instances should be inserted might be useful.
I have figured out a top level symbol with a schematic below to hide parameters is useful but guess there are more. I started to draw configuration for one of the machines and will probably figure out more during this. I am not totally sure which part should be source of the servo thread and have seen the servo period is specified then emcmot is loaded. For constant parameters I guess a simple symbol would work perfectly well. Nicklas Karlsson ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
