Hi guys
I am struggeling alot with my lathe X axis. The machine does not hold size
at all. I am using The Leadshine ESM-22430 motor and the DS808 drive. The
Dirsetup is set at 2500, Dirhold 2500, Steplen 5000, Stepspace 5000 and
stepscale at -322. The ballscrew has a 2.5mm pitch and the steps per rev
are set at 800.
Can anybody please give me some advice?
Thanks
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
