> From: andy pugh [mailto:bodge...@gmail.com]
> I have found these more than adequate for a CNC machine. G-code files are > small: > http://www.ebay.co.uk/itm/Industrial-Disk-on-Module-Kingspec-SATA-SLC- > DOM-7Pins-8GB-SLC-1CH-/262850750707 > Plug directly into the SATA socket. (though they also need 5V from > somwhere else on the motherboard) I like that one. > > Power Supply > > http://www.mini-box.com/picoPSU-90 > > Alternatively some motherboards run from 12V directly. (And there are > some that run on 24V happily too) > > -- The PICO is nice too if you have the 12V available for relays and stuff anyway. John ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
