On 10/28/2017 10:23 PM, Gene Heskett wrote:
I wound up adding an update-grub after the grub install in the recipe that deloptes posted on the debian list today. And somewhere along the line I found I had NOT copied over the /usr tree of the old drive, which probably caused the next problem, that of my TDE login being bogus, so I copied that across and then re-installed the heart of TDE, 20 debs, reset /tmp's perms to 0777 and I'm off to the races now. Even have the spindle tuned up a bit better. At about 90 revs, in low gear, I can grab the chuck and can't slow it, period. I set the reverse bias up (I'm rigged to apply different bias settings to the pid.s depending on direction, and got the actual speed quite a bit more symmetrical with that).
You really should set the /tmp dir perms to 1777. The sticky bit should be set on that directory.
Cheers, Gene Heskett
Cheers, Mark ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
