On 10/29/2017 11:13 AM, Gene Heskett wrote:
On Sunday 29 October 2017 08:38:07 Mark wrote:
On 10/28/2017 10:23 PM, Gene Heskett wrote:
I wound up adding an update-grub after the grub install in the
recipe that deloptes posted on the debian list today. And somewhere
along the line I found I had NOT copied over the /usr tree of the
old drive, which probably caused the next problem, that of my TDE
login being bogus, so I copied that across and then re-installed the
heart of TDE, 20 debs, reset /tmp's perms to 0777 and I'm off to the
races now. Even have the spindle tuned up a bit better. At about 90
revs, in low gear, I can grab the chuck and can't slow it, period. I
set the reverse bias up (I'm rigged to apply different bias settings
to the pid.s depending on direction, and got the actual speed quite
a bit more symmetrical with that).
You really should set the /tmp dir perms to 1777. The sticky bit
should be set on that directory.
Done, thanks Mark.
Cheers, Gene Heskett
Cheers,
Mark
Gene,
More of a security thing than anything else. The /tmp directory needs
to be publicly writable, but the sticky bit keeps other users from
monkeying with your files in that directory, ie - deleting or renaming them.
Cheers,
Mark
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
