On Sunday 29 October 2017 08:38:07 Mark wrote: > On 10/28/2017 10:23 PM, Gene Heskett wrote: > > I wound up adding an update-grub after the grub install in the > > recipe that deloptes posted on the debian list today. And somewhere > > along the line I found I had NOT copied over the /usr tree of the > > old drive, which probably caused the next problem, that of my TDE > > login being bogus, so I copied that across and then re-installed the > > heart of TDE, 20 debs, reset /tmp's perms to 0777 and I'm off to the > > races now. Even have the spindle tuned up a bit better. At about 90 > > revs, in low gear, I can grab the chuck and can't slow it, period. I > > set the reverse bias up (I'm rigged to apply different bias settings > > to the pid.s depending on direction, and got the actual speed quite > > a bit more symmetrical with that). > > You really should set the /tmp dir perms to 1777. The sticky bit > should be set on that directory.
Done, thanks Mark. > > Cheers, Gene Heskett > > Cheers, > Mark > > > > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
