The lights do not turn on the switch port that your Ethercat device is
plugged into?
Did you install TwinCat 2 or TwinCat 3. I have TwinCat 3 loaded on a
laptop here.
Check this out. This is for TwinCat2
https://infosys.beckhoff.com/english.php?content=../content/1033/tcsystemmanager/reference/ethercat/html/EtherCAT_intro.htm&id=
See the Suchen button. I think that is "search" in German.
https://infosys.beckhoff.com/english.php?content=../content/1033/cu1128/1037001483.html&id=
https://infosys.beckhoff.com/english.php?content=../content/1033/epp1xxx/2154676107.html&id=
Dave
On 12/12/2017 2:40 PM, Nicklas Karlsson wrote:
I have installed and try to figure out how to scan Ethernet network for
Ethercat devices. I connected to a switch but LEDs do not come on so I guess
something is wrong.
On Tue, 12 Dec 2017 09:50:02 -0500
Dave Cole <[email protected]> wrote:
FWIW, the Twincat software is a free download.
Dave
On 12/11/2017 2:39 PM, Nicklas Karlsson wrote:
These links provided me with the answer. The EEPROM is supposed to be
programmed via Ethernet connector. Beckhoff have special software for this and
I also see Twincat system manager, maybe it's just manager software according
to standard?
On Mon, 11 Dec 2017 12:17:03 +0200
Roland Jollivet <[email protected]> wrote:
Have the looked at this application note; AN1920
<https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjO4ZvL24HYAhVHJMAKHXWPC_AQFggoMAA&url=http%3A%2F%2Fww1.microchip.com%2Fdownloads%2Fen%2FAppNotes%2F00001920A.pdf&usg=AOvVaw01fUuVChhmFx3GfVIz8DHt>
?
And maybe this article
<https://www.manualslib.com/manual/989925/Microchip-Technology-Evb-Lan9252-Dig-Io.html?page=21>
..
On 11 December 2017 at 07:50, Nicklas Karlsson <[email protected]
wrote:
looks like it according to page 24
These pins are the Distributed Clock Sync (OUT) or
Latch (IN) signals. The direction is bitwise configurable.
Note: These signals are not driven (high impedance) until the EEPROM is
loaded.
Basic problem is I do not know how to get LAN9252 started. Crystal is up
and running but nothing happens then I insert a Ethernet cable. SPI is not
running since it read configuration from EEPROM but how do I program
configuration? Maybe I should program EEPROM before soldering it to board?
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
