On 12.04.18 04:02, jeremy youngs wrote: > You just invoke $ units in terminal and punch the conversion you want ? > That's awesome
Yup, it is awfully convenient, e.g.: # For stepper motors: You have: 280 oz force in # There's no "ozf". You want: N m # There is a conformability error if the * 1.9772345 # oz isn't made oz force. / 0.5057569 # See: "force" toward end of the manpage. If you muck up the units by forgetting the "force", it tells you. Some other examples: You have: 1 fathom^3 waterdensity # Water mass You want: tons * 6.7422197 / 0.14831911 Water depth equal to one atmosphere: # Water column You have: atm You want: ft water * 33.898538 / 0.029499797 And a couple I used recently: # PV Cable: Resistance of 16 m: You have: 16m/(copperconductivity * 4 mm^2) You want: ohms * 0.068965517 / 14.5 # PV Cable: Power Loss @ 8 amps: You have: (8 A)^2 * 16m/(copperconductivity * 4 mm^2) You want: W * 4.4137931 / 0.2265625 Beats using a sliderule. Erik ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users