On Tue, 12 Mar 2019 at 11:20, linden <lin...@aktfast.net> wrote: > I now get an error "parameter or pin 'hm2_7i76e.0.0.7i76.0.output-00' > not found" (I have also tried with 12 same error)
It should probably be hm2_7i76e.0.0.7i76.0.0.output-00 > Is there a way via terminal or linuxcnc to read the current > configuration of the 7i76e Yes. Comment-out all the lines that are causing a problem then start LinuxCNC. Now open a terminal and type halcmd show pin halcmd show param And maybe copy the output to a text file for future reference. Also, this line is unnecessary: setp hm2_7i76e.0.7i76.0.0.output-00 true and this line shouldnt have a .out at the end (I don't think) net coolant-flood hm2_7i76e.0.7i76.0.0.output-00.out -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users