I've stayed with AlibreCAD and AlibreCAM through thick and thin. For a while it was MecSoft's CAM but now that Alibre has re-integrated I like that the two applications are linked. I can tweak a drawing. Adjust the CAM. There are probably down sides but I don't know them.
During the Geomagic period I had a USB dongle for each. Now we're back onto call home internet licensing. I prefer the dongles. No experience with Fusion360. John > -----Original Message----- > From: Jeff Johnson [mailto:[email protected]] > Sent: March-22-19 2:15 PM > To: [email protected] > Subject: [Emc-users] Fusion 360 > > Anyone on here have opinions on Fusion 360 Cad/Cam by Autodesk? > > Using ShopCam for simple 2.5D work, VisualCam for 3 or more axis work, > using Alibre Cad for 3D Drwaing and creation as well as ProgeCad for 2D > Drawings. > > With this combo there is not much we can't handle but maintenance > agreements > and updates do get cumbersome. > > > > I am worried about moving to the cloud based system but I guess it's the > future. > > > > What are this groups thoughts if any? > > > > Jeff Johnson > > [email protected] > > Superior Roll & Turning > > 734-279-1831 > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
