On Friday 22 March 2019 18:52:54 Lester Caine wrote: > On 22/03/2019 22:46, Bruce Layne wrote: > > I use FreeCAD, mostly for 3D printing. It's still not ready for > > prime time and doesn't have a usable CAM system so it's not a > > possible replacement for Fusion 360, but it's a viable CAD option > > for me when Fusion 360 isn't. > > Sorry I have to disagree with that ... I'm running perfectly good > gcode for the Taig mill from FreeCAD. Yes for 3D printing one of the > other slicer options is required, but for 2.5D machining it works well > enough and is improving all the time.
If its being improved Lester, why has the downloadable been stuck at version .14 for several years? I take it back, the last 32 bit release that will run on the wheezy LiveCD install is .14, but I see .17 is available for 64 bit installs now. So you have to reboot to a 64 bit install to use it. Is it worth setting up a dual boot? Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users