Longtime user of the 7i92. Former user of Mach3/Smoothstepper.
It is very good all around, perfect high performance, and frees you from
almost any PC latency probs.
It can configure as a plain-jane parallel port that you'd plug and play
into PMDX-126, but also other things.
Combine with Linux RT-Preempt and it's SO solid
Danny
On 6/1/2019 3:01 PM, Andy Pugh wrote:
On 1 Jun 2019, at 20:52, John Dammeyer <jo...@autoartisans.com> wrote:
Therefore under LinuxCNC I need something with say an Ethernet interface that
has two ribbon cables compatible with PC Parallel port pinout so the latency
isn't an issue
http://store.mesanet.com/index.php?route=product/product&path=69_62&product_id=306
(Or also look at the 7i80)
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
