I've figured out a way to get a 7192H to a friend who will be staying at a hotel in San Diego mid-June. He'll bring it back. Then I don't have to pay $38US for shipping. Only $8.60 for USPS. Really too bad there isn't a driver for MACH3 for this board to make the dual boot option easier.
John > -----Original Message----- > From: Danny Miller [mailto:[email protected]] > Sent: June-01-19 7:09 PM > To: [email protected] > Subject: Re: [Emc-users] Dual boot for WIN-XP and LinuxCNC > > Longtime user of the 7i92.� Former user of Mach3/Smoothstepper. > > It is very good all around, perfect high performance, and frees you from > almost any PC latency probs. > > It can configure as a plain-jane parallel port that you'd plug and play > into PMDX-126, but also other things. > > Combine with Linux RT-Preempt and it's SO solid > > Danny > > > On 6/1/2019 3:01 PM, Andy Pugh wrote: > > > >> On 1 Jun 2019, at 20:52, John Dammeyer <[email protected]> wrote: > >> > >> Therefore under LinuxCNC I need something with say an Ethernet interface > that has two ribbon cables compatible with PC Parallel port pinout so the > latency isn't an issue > > > http://store.mesanet.com/index.php?route=product/product&path=69_62&pro > duct_id=306 > > > > (Or also look at the 7i80) > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
